D Rex Ledge

A raked, hip-ended bank running up to a full-length coped ledge wall: ride up the 18° middle band or either 28° hip end, onto a 75 mm deck, to a 55 mm grind wall capped with twin 10 mm angle coping.

Replica of the D-Rex Ledge

About these dimensions

This plan is a replica. We worked out its dimensions from product photos. 10 of its 10 dimensions are estimates, marked ≈ on the drawings.

Own the real thing? Measure it and tell us on Discord and we'll update the plan.

Downloads

Drawings (SVG, ZIP) 3D model (STL) CAD solid (STEP) Cutting profile (DXF)

Sheet prints at 1:5. All plan files are in millimeters at 1:1.

Open source

These plans are free to use, adapt and share under the CC BY 4.0 license.

D Rex Ledge Part Bank Skin — Part Bank Skin

D Rex Ledge Part Deck Skin — Part Deck Skin

D Rex Ledge Part Hip Skin — Part Hip Skin

D Rex Ledge Part Ledge End — Part Ledge End

D Rex Ledge Part Ledge Front Wall — Part Ledge Front Wall

D Rex Ledge Part Ledge Rear Wall — Part Ledge Rear Wall

D Rex Ledge Part Ledge Top — Part Ledge Top